Explorer Sport Trac AWD V8-4.6L (2010)
5. NOTICE: If the components are to be reinstalled, they must be installed in their original positions. Mark the components for installation
into their original locations. Failure to follow these instructions may result in engine damage.
Remove only the 3 roller followers shown in the illustration from the RH cylinder head.
6. NOTE: Do not allow the valve keepers to fall off the valve or the valve may drop into the cylinder. If a valve drops into the cylinder, the cylinder
head must be removed. For additional information, refer to Cylinder Head See: Cylinder Head Assembly/Service and Repair/Removal and
Replacement/Cylinder Head - Removal.
NOTE: It may be necessary to push the valve down while compressing the spring.
Using the Valve Spring Compressor, remove the 3 roller followers designated in the previous step from the RH cylinder head.
7. NOTICE: If the components are to be reinstalled, they must be installed in their original positions. Mark the components for installation
into their original locations. Failure to follow these instructions may result in engine damage.
Remove only the 3 roller followers shown in the illustration from the LH cylinder head.