Explorer Sport Trac AWD V8-4.6L (2010)
Shifter A/T: Service and Repair
Selector Lever Bezel
Selector Lever Bezel
Removal
1. Remove the front floor console. For additional information, refer to Instrument Cluster / Carrier &/or Interior Moulding / Trim.
2. Disconnect the Transmission Control Switch (TCS) electrical connector and feed the wire through the selector lever housing.
3. Slide the selector lever knob lower trim cover downward.
4. Remove the set screw and remove the selector lever knob while routing the TCS harness out of the selector lever housing.