F 100 2WD Pickup V8-302 5.0L (1983)
![background image](/ford/f_100_2wd_pickup/v8-302_5.0l/Page-1198016.png)
Figure 9 - HOLE DRILLING INSTRUCTIONS - CAM ATTACHMENT TO LOWER FLANGE RADIUS ARM
3.
With template secure, make a punch mark at the center of the small hole inside the printed circle. Scribe the slot printed/cut-out on the template
and die-grind out the slot at the axle-attaching hole the same size as the slot in the template and de-burr the surface avoiding rounding the edges of
the slot. Refer to Figure 9.