F 150 2WD V8-4.6L (2008)
Part 2
Removal and Installation
1. Remove the rear door trim panel.
2. Position the watershield aside.
3. Remove the 2 rear door handle rivets.
4. Position the rear door handle aside.
5. Disconnect the lower rear door latch actuating cable from the rear door handle.
6. Remove the 3 bolts and the lower rear door latch.
-
To install, tighten to 12 Nm (106 lb-in).
7. To install, reverse the removal procedure.
-
Lubricate the lower rear door latch after installation.