F 150 2WD V8-4.6L (2008)
SuperCrew (Part 2)
Removal and Installation
1. Remove the front door scuff plate.
2. Remove the lower safety belt anchor bolt.
-
To install, tighten to 48 Nm (35 lb-ft).
3. Remove the B-pillar trim cover.
4. Remove the B-pillar bolt trim cover.
5. Remove the B-pillar bolt.
6. Remove the safety belt bolt cover.
7. Remove the safety belt bolt.
-
To install, tighten to 48 Nm (35 lb-ft).
8. Remove the rear seat backrest.
9. Remove the pin-type retainer from the B-pillar trim panel.
10. Pull the safety belt through the B-pillar trim panel.
11. Remove the B-pillar trim panel.
12. To install, reverse the removal procedure.
B-Pillar Trim Panel - SuperCrew
B-PILLAR TRIM PANEL - SUPERCREW
Exploded View