F 150 2WD V8-4.6L (2008)
![background image](/ford/f_150_2wd/v8-4.6l/Page-2410009.png)
4. Release the backrest J-clips.
5. CAUTION: Use care when separating the seat backrest trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn
from the seat backrest foam pad.
Separate the hook-and-loop fasteners.
6. Remove the hog rings. Remove the seat trim cover and the backrest foam pad.
7. NOTE: If necessary, install new plastic lock clips.
Push the release tabs and remove the 3 backrest plastic lock clips (one shown).