F 150 2WD V8-4.6L (2008)
![background image](/ford/f_150_2wd/v8-4.6l/Page-600001.png)
Push Rod: Testing and Inspection
Push Rod Cleaning and Inspection
Special Tool(s)
1. Clean the push rods in a suitable solvent. Blow out the oil passage in the push rods with compressed air.
2. NOTE: Do not attempt to straighten the push rods.
Check the ends of the push rods for nicks, grooves, roughness or excessive wear.
^
The push rods can be checked for straightness while they are installed in the engine by rotating them with the valve closed.
^
They also can be checked using a Dial Indicator.