F 150 2WD V8-4.6L (2008)
Harmonic Balancer - Crankshaft Pulley: Specifications
Crankshaft Pulley Bolt
CAUTION: This bolt is torque-to-yield and cannot be reused. Failure to follow these instructions may result in engine damage.
First pass ................................................................................................................................................................................................. 90 Nm (66 lb-ft).
Second pass ........................................................................................................................................................................................ Loosen one full turn
Third pass ............................................................................................................................................................................................... 50 Nm (37 lb-ft).
Final pass ..................................................................................................................... Tighten an additional 90° without exceeding 200 Nm (148 lb-ft).
