F 150 2WD V8-4.6L (2008)
Air Filter Element: Service and Repair
AIR CLEANER ELEMENT
Exploded View
Removal and Installation
1. Disconnect the mass air flow (MAF) sensor electrical connector. Detach the electrical connector retainer.
2. Loosen the clamp and disconnect the air cleaner outlet pipe from the air cleaner cover.
-
To install, tighten to 4 Nm (35 lb-in).
3. Open the clamp and detach the air cleaner cover from the air cleaner tray.
4. Remove the air cleaner element.
5. To install, reverse the removal procedure.