F 150 2WD V8-4.6L (2008)
5. Remove the bolt and the CKP sensor.
-
To install, tighten to 10 Nm (89 lb-in).
6. To install, reverse the removal procedure.
-
Lubricate the O-ring seal with clean engine oil prior to installation.
5. Remove the bolt and the CKP sensor.
-
To install, tighten to 10 Nm (89 lb-in).
6. To install, reverse the removal procedure.
-
Lubricate the O-ring seal with clean engine oil prior to installation.