F 150 2WD V8-4.6L (2008)
4. Remove the 4 driveshaft flange bolts.
5. NOTE: The driveshaft centering socket yoke fits tightly on the pinion flange pilot. Never hammer on the driveshaft or any of its components to
disconnect the driveshaft centering socket yoke from the pinion flange. Pry only in the area shown with a suitable tool to disconnect the driveshaft
centering socket yoke from the pinion flange.
Using a suitable tool as shown, disconnect the driveshaft centering socket yoke from the pinion flange.
^
Using mechanic's wire, position the driveshaft aside.
6. Using a Nm (lb-in) torque wrench on the pinion nut, record the torque required to maintain rotation of the pinion gear through several revolutions.