F 150 2WD V8-4.6L (2008)
![background image](/ford/f_150_2wd/v8-4.6l/Page-1484003.png)
3. NOTE: Do not damage the rubber O-ring in the U-washer groove.
Install the U-washer.
1
Position the U-washer on the button end of the axle shaft.
2
Pull the axle shaft outward.
4. NOTE: If a new bolt is unavailable, coat the bolt threads with threadlock prior to installation.
Install the differential pinion shaft.
^
Align the bolt hole in the differential pinion shaft with the bolt hole in the case.
^
Install the new pinion shaft lock bolt.
^
Tighten to 30 Nm (22 lb-ft).
5. Install the rear brake disc.
6. Install the differential housing cover and fill the differential housing with the specified lubricant.
7. Install the rear wheel and tire.