F 150 2WD V8-4.6L (2008)
5. Remove the U-washer.
1
Push in on the axle shaft.
2
Remove the U-washer.
6. Remove the axle shaft.
Installation
1. Lubricate the lip of the axle shaft oil seal with grease.
2. Install the axle shaft.
5. Remove the U-washer.
1
Push in on the axle shaft.
2
Remove the U-washer.
6. Remove the axle shaft.
Installation
1. Lubricate the lip of the axle shaft oil seal with grease.
2. Install the axle shaft.