F 150 2WD V8-4.6L (2008)
4. Remove the front door window glass-to-regulator assembly bolts.
-
Loosen the glass clamp fasteners through the 2 vertical slots in the inner door panel.
-
To install, tighten to 9 Nm (80 lb-in).
5. Disconnect the front door window electrical connector.
6. Remove the front door window regulator bolts.
-
To install, tighten to 11 Nm (8 lb-ft).
7. Remove the front door window regulator and motor.
8. To install, reverse the removal procedure.