F 150 2WD V8-4.6L VIN 8 (2009)
1. For additional information, refer to the procedures.
Seat Latch - Rear, SuperCab
Seat Latch - Rear, SuperCab
Removal and Installation
NOTE: 40 percent and 60 percent rear seat cushion latches are removed in the same manor.
NOTE: For parts identification and location, refer to Seat - Exploded View, Rear, SuperCab See: Service and Repair/Rear/Seat - Exploded View, Rear,
SuperCab.
1. Remove the rear seat. For additional information, refer to Seat - Rear, SuperCab See: Service and Repair/Rear/Seat - Rear, SuperCab.
2. Remove the cushion pivot bolt.
-
To install, tighten to 33 Nm (24 lb-ft).
3. Remove the rear screw from the outboard riser.
-
Separate the cushion from the inboard riser to avoid pivot bushing damage.