F 150 2WD V8-4.6L VIN W (2007)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor Rear
Wheel Speed Sensor Rear
Removal and Installation
1. Disconnect the battery ground cable.
2. With the vehicle in NEUTRAL, position it on a hoist.
3. Disconnect the wheel speed sensor electrical connector.
4. Remove the wheel speed sensor bolt.
^
To install, tighten to 15 Nm (11 ft. lbs.).
5. NOTE: Install a new O-ring before installing the rear axle speed sensor.
Remove the wheel speed sensor.
6. To install, reverse the removal procedure.