F 150 2WD V8-5.0L (2011)
Truck Bed: Service and Repair
FRAME MEMBERS - BED ATTACHMENT BRACKET
Special Tool(s)
General Equipment
3 Phase Inverter Spot Welder 254-00002
Compuspot 700F Welder 190-50080
I4 Inverter Spot Welder 254-000014
Inverter Welder with MIG Welder 254-00015
Material
WARNING:
-
Frame rail crush zones absorb crash energy during a collision and must be replaced if damaged. Straighten damaged frame rails to
correct frame dimensions prior to frame member sectioning. Failure to follow these instructions may adversely affect frame rail
performance and may result in serious personal injury to vehicle occupant(s).
-
Invisible ultraviolet and infrared rays emitted in welding can injure unprotected eyes and skin. Always use protection such as a welder's
helmet with dark-colored filter lenses of the correct density. Electric welding will produce intense radiation, therefore, filter plate lenses
of the deepest shade providing adequate visibility are recommended. It is strongly recommended that persons working in the weld area
wear flash safety goggles. Also wear protective clothing. Failure to follow these instructions may result in serious personal injury.
-
Always wear protective equipment including eye protection with side shields, and a dust mask when sanding or grinding. Failure to
follow these instructions may result in serious personal injury.