F 150 2WD V8-5.4L Flex Fuel (2008)
5. Lower the engine.
6. CAUTION: Only use hand tools when installing the LH engine mount bolt or damage to the engine mount can occur.
Apply Threadlock(R) to the threads and install the LH engine support insulator bolt.
^
Tighten to 350 Nm (258 lb-ft).
7. CAUTION: Only use hand tools when installing the RH engine mount nuts or damage to the engine mount can occur.
NOTE: Make sure the RH engine support insulator mating surfaces and the washer mating surface are free of foreign material and corrosion
before installation. Install a new washer.
Apply Threadlock(R) to the stud threads and install the RH engine support insulator washer and nuts.
^
Tighten to 250 Nm (184 lb-ft).
LH engine support insulator
8. If installing the LH engine support insulator in a 4WD vehicle, align the front driveshaft flange to the front axle pinion flange at the index mark
and install the bolts.
^
Tighten to 111 Nm (82 lb-ft).
9. Install the oil level indicator and tube.