F 150 2WD V8-5.4L Flex Fuel (2008)
Installation
1. CAUTION: Make sure the O-ring is in place and not damaged. A missing or damaged O-ring can cause foam in the lubrication system,
low oil pressure and severe engine damage.
NOTE: Clean and inspect the mating surfaces and install a new O-ring. Lubricate the O-ring with clean engine oil prior to installation.
Position the oil pump screen and pickup tube and install the bolts.
^
Tighten the oil pump screen and pickup tube-to-oil pump bolts to 10 Nm (89 lb-in).
^
Tighten the oil pump screen and pickup tube-to-spacer bolt to 25 Nm (18 lb-ft).
2. Install the oil pan.