F 150 2WD V8-5.4L Flex Fuel (2008)
24. NOTE: If not secured within 4 minutes, the sealant must be removed and the sealing area cleaned with metal surface prep and silicone gasket
remover. Follow the directions on the packaging. Allow to dry until there is no sign of wetness, or 4 minutes, whichever is longer. Failure to
follow this procedure can cause future oil leakage.
Apply silicone gasket and sealant to the Woodruff key slot on the crankshaft pulley.
25. Use the special tool to install the crankshaft pulley.
26. Tighten the new crankshaft pulley bolt in 4 stages.
^
Stage 1: Tighten to 90 Nm (66 lb-ft).
^
Stage 2: Loosen 360 degrees.
^
Stage 3: Tighten to 50 Nm (37 lb-ft).
^
Stage 4: Tighten an additional 90 degrees.