F 150 2WD V8-5.4L Flex Fuel (2008)
2. NOTE: If the new drive pinion seal becomes misaligned during installation, remove the drive pinion seal and install a new drive pinion seal.
Using the special tool, install a new drive pinion seal.
3. Lubricate the pinion flange splines with axle lubricant.
4. NOTE: Disregard the scribe marks if a new pinion flange is being installed.
Align the pinion flange with the drive pinion shaft.
5. Using the special tools, install the pinion flange.
6. CAUTION: Install a new pinion nut with the same color as the original if not replacing the collapsible spacer. If a new collapsible spacer
is installed, install the nut in the kit or damage to the component may occur.
Position the new pinion nut.
8.8-In Drive Pinion Nut