F 150 2WD Lightning V8-5.4L SOHC SC VIN 3 (2001)
5. Connect the brake pedal motor electrical connector.
6. Install the brake pedal to accelerator pedal cable in the accelerator pedal.
7. Connect the battery negative cable.
8. CAUTION: When installing the brake pedal-to-accelerator pedal cable, the brake pedal and the accelerator pedal must be in the same position,
all the way forward or all the way rearward.
Position the accelerator pedal using the brake pedal motor, all the way forward or backward, depending on the position of the new brake pedal.