F 150 2WD Lightning V8-5.4L SOHC SC VIN 3 (2001)
14. Remove the bearing caps and bolts.
^
To establish differential bearing preload, increase both left and right shim sizes by the specification shown in the illustration.
^
Using the special tool, make sure that the differential bearing shims are fully seated and the assembly turns freely.
15. Install the bearing caps and bearing cap bolts.
16. Using the special tool, recheck the backlash.
17. Install the axle shafts.
18. Fill the rear axle housing with 2.37 liters (5.5 pints) with the specified lubricant.
Differential Case and Ring Gear - Conventional
Differential Case and Ring Gear -Conventional