F 150 2WD Pickup V6-4.2L VIN 2 (1997)
5.
Remove harness locator from the inside door panel (Figure 2).
6.
Repair or replace chafed and damaged wires as necessary.
7.
Drill a 6.35 mm (0.25") hole 15 mm left and 7 mm down from the center of the old locator hole (Figure 2).
8.
Install harness locator in the new hole and verify clearance of harness to door handle latch mechanism.
9.
Install watershield and door latch rod to inside door handle mechanism.
10.
Install door trim panel. Refer to the 1997 F-150 Workshop Manual, Page 501-05-12.
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
OPERATION
DESCRIPTION
TIME
961718A
Reposition And Repair
0.6 Hr.
Wiring Harness
DEALER CODING
CONDITION
BASIC PART NO.
CODE
14A005
43
OASIS CODES: 102000,112000, 201100, 203000, 203200, 205000