F 150 2WD Pickup V6-4.2L VIN 2 (1997)
2
Use Safety Belt Bolt Bit T77L-2100-A to remove the bolt.
3
Remove the driver seat safety belt buckle.
4. On manual driver seats, remove the driver side safety belt buckle.
1
Disconnect the safety belt warning indicator switch electrical connector.
2
Remove the driver seat safety belt buckle nut.
3
Remove the driver seat safety belt buckle.
INSTALLATION
To install, reverse the removal procedure. Check for proper operation.
NOTE: Make sure that safety belt webbing is not twisted prior to installation.