F 150 2WD Pickup V6-4.2L VIN 2 (1997)
Clutch Fluid: Service and Repair
Bleeding - Clutch Hydraulic System
Clutch Hydraulic System Bleeding
NOTE: Be sure to keep the clutch master cylinder reservoir full to prevent air from entering the clutch master cylinder.
1. Fill clutch master cylinder reservoir to full line.
-
Use Ford High Performance DOT 3 Brake Fluid or DOT 3 equivalent meeting Ford specification ESA-M6C25-A.
2. Depress the clutch pedal rapidly for five to ten strokes.
3. Wait one to three minutes.
4. Repeat steps 2 and 3 more times.
5. Loosen bleed screw.
6. Fully depress clutch pedal and hold.