F 150 2WD Pickup V8-351 5.8L (1986)
Fuel Supply Line: All Technical Service Bulletins
Fuel System Spring Lock Fitting - Proper Assembly
Article No. 85-22-27
FUEL SYSTEM - PROPER ASSEMBLY TECHNIQUE FOR SPRING LOCK FITTING AT ENGINE FUEL SUPPLY AND RETURN LINE
CONNECTIONS
LIGHT TRUCK 1986 RANGER, BRONCO II, AEROSTAR, BRONCO, E & F SERIES
The following additional information supplements the spring lock fuel connection removal and installation procedures in the Light Truck Shop Manual,
Section 24-50 for E & F Series, Bronco, Ranger, and Bronco II; and 9-06 for Aerostar.
At initial assembly, a white plastic indicator ring is used to assure proper assembly of the spring lock fitting at the fuel supply line connection to the
engine fuel rail, and at the engine fuel return line connection.
Figure 24 - PROPER ASSEMBLY TECHNIQUE FOR SPRING LOCK FITTING AT ENGINE/FUEL LINE INTERFACE - ALL EFI ENGINES
After each of these two fitting connections are assembled, the white plastic indicator ring remains (loose) on the fuel line (as shown in Figure 24).