F 150 2WD Pickup V8-4.6L (2002)
Installation
1. If removed, install the Output Shaft Speed (OSS) sensor.
1
Lubricate the O-ring and install the Output Shaft Speed (OSS) sensor.
2
Install the bolt.
2. Position the Heated Oxygen Sensor (HO2S) connector back in place.
3. If removed, install the Turbine Shaft Sensor (ISS).
1
Lubricate the O-ring and install the Turbine Shaft Sensor (TSS).
2
Install the bolt.
4. Connect the affected sensor, either the OSS or TSS.
5. Lower the vehicle.