F 150 2WD Pickup V8-4.6L CNG SOHC VIN 9 (1997)
![background image](/ford/f_150_2wd_pickup/v8-4.6l_cng_sohc_vin_9/Page-723049.png)
48.
Loosely install four (4) front oil pan bolts. Tighten bolts in sequence shown in Figure 66, in the following two (2) stages:
^
Stage 1: 20 Nm (15 lb-ft).
^
Stage 2: Rotate an additional 60 degrees.
49.
Lower vehicle.
50.
Using coolant, lubricate new water pump O-ring seal. Install seal on water pump.
51.
Install water pump. Tighten retainers in sequence shown in Figure 67, to 20-30 Nm (15-22 lb-ft).