F 150 2WD Pickup V8-4.6L CNG SOHC VIN 9 (1997)
5. Clean the compressor nose area.
6. Use (A) Snap Ring Remover to remove the (B) shaft seal snap ring.
7. Engage (A) Shaft Seal Remover into the (B) internal diameter of the shaft seal.
8. Turn the tool handle clockwise to expand the tool tip inside of the shaft seal.
9. Pull the seal from the compressor.
INSTALLATION
CAUTION: Do not allow dirt or other foreign materials to enter the compressor.
NOTE: Obtain a new A/C Compressor Shaft Seal Kit. Carefully remove the contents of the kit and inspect the plastic shaft seal protector for burrs or
other damage. DO NOT USE IF IT IS DAMAGED.
1. Clean the compressor nose area.