F 150 2WD Pickup V8-4.6L CNG SOHC VIN 9 (1997)
![background image](/ford/f_150_2wd_pickup/v8-4.6l_cng_sohc_vin_9/Page-2550003.png)
10. Use Safety Belt Bolt Bit T77L-2100-A to remove the rear safety belt anchor bolt.
INSTALLATION
To install, reverse the removal procedure. Check for proper operation.
NOTE: Make sure that safety belt webbing is not twisted prior to installation.
NOTE: Make sure that after an Automatic Locking Retraction (ALR) retractor is replaced that the retractor is not in the ALR mode of operation
when it is installed.