F 150 2WD Pickup V8-4.6L CNG SOHC VIN 9 (1997)
6. Install by snapping the spring retainer assembly on pump body.
7. Install the (A) inner and (B) outer fluid pump gerotor gears.
NOTE: The flats on the inner fluid pump gear have steps that must face the pump body for ease of installing the torque converter.
8. Install the (A) reverse clutch cylinder seal and the (B) forward clutch cylinder seals.
NOTE: The reverse clutch cylinder seals are larger than the forward clutch cylinder seals.
9. Install new front pump seal.
