F 150 2WD Pickup V8-4.6L SOHC VIN W (1998)
2. Use the Crankshaft Damper Replacer to install the crankshaft pulley.
3. Install the bolt and washer. Tighten the bolt in four steps.
-
Step l: Tighten to 90 Nm (66.15 ft. lbs.).
-
Step 2: Loosen the bolt.
-
Step 3: Tighten to 47-53 Nm (34-39 ft. lbs.).
-
Step 4: Tighten an additional 85-90 degrees.
4. Install the drive belt.
5. Install the engine cooling fan and the fan shroud.