F 150 2WD Pickup V8-4.6L SOHC VIN W (1998)
3. Install the bolts.
4. Install the bolt.
NOTE: If the oil pan is not secured within four minutes, the sealant must be removed and the sealing area cleaned with Metal Surface Cleaner
F4AZ- l9A536-RA or equivalent meeting Ford specification WSE-M5B392-A. Allow to dry until there is no sign of wetness, or four minutes,
whichever is longer. Failure to follow this procedure may result in future oil leakage.
5. Apply the silicone at the engine front cover to cylinder block mating surface.
-
Use Ford Silicone Gasket and Sealant F6AZ-19562-AA or equivalent meeting Ford specification WSE-M4G323-A6.
NOTE: If the if the oil pan is not secured within four minutes, the sealant must be removed and the sealing area cleaned with Metal Surface
Cleaner F4AZ- 19A536-RA or equivalent meeting Ford specification WSE-MSB392-A. Allow to dry until there is no sign of wetness, or four
minutes, whichever is longer. Failure to follow this procedure may result in future oil leakage.
