F 150 2WD Pickup V8-4.6L SOHC VIN W (1998)
29.
Rotate crankshaft using Crankshaft Holding Tool T93P-6303-A. See Figure 54. Fully install holding tool. This will position crankshaft keyway to
about 10:30 position.
30.
Remove Crankshaft Holding Tool.
31.
Compress timing chain tensioner plunger as follows:
CAUTION
Do not compress the ratchet assembly. This will damage the ratchet assembly.
CAUTION
Use protective vocers over jaws of vise to prevent damage to tensioner.
^
Compress tensioner plunger using edge of vise. See Figure 55.