F 150 2WD Pickup V8-4.6L SOHC VIN W (1998)
Seals and Gaskets: Service and Repair
EXTENSION HOUSING SEAL AND GASKET - 4 X 2
Special Tools
REMOVAL
1. Disconnect the battery ground cable.
2. Raise and support the vehicle.
3. Drain the transmission fluid.
4. Remove the rear driveshaft.
1
Remove the four bolts.
2
Remove the rear driveshaft.
NOTE: To maintain initial driveshaft balance, mark the rear driveshaft yoke and axle flange so they may be installed in their original
positions.