F 150 2WD Pickup V8-4.6L SOHC VIN W (1998)
2. Install a new bearing cup into the driveshaft center yoke.
1
Start a new bearing cup into the driveshaft center yoke.
2
Position the driveshaft center yoke in the U-Joint tool.
3
Press the bearing cup below the driveshaft center yoke surface.
^
Rotate the driveshaft 180° and repeat for the other bearing cup.
3. Install a new centering cup spring.
4. Install four new snap rings.
5. Install a new bearing cup into the driveshaft centering socket yoke.
1
Start a new bearing cup into the driveshaft centering socket yoke.
2
Position the new spider in the driveshaft centering socket yoke.
3
Position the driveshaft centering socket yoke in the U-Joint Tool.
4
Press the bearing cup below the driveshaft centering socket yoke surface.