F 150 2WD Pickup V8-4.6L VIN W (2006)
Sunroof / Moonroof Frame: Service and Repair
Roof Opening Panel Frame
ROOF OPENING PANEL FRAME
Removal and Installation
NOTE: The roof opening panel motor must be initialized when repairs are carried out on any part of the roof opening panel, including: whenever the
roof opening panel motor has been removed from the roof opening panel assembly, a new roof opening panel motor has been installed or when a new
roof opening panel frame has been installed.
1. Remove the headliner.
2. Remove the roof opening panel glass.
3. Remove the roof opening panel shield.
4. Remove the roof opening panel air deflector.
5. NOTE: Make sure the drain hoses are not kinked during installation.
Disconnect the 2 roof opening panel front drain hoses from the frame.
6. NOTE: Make sure the drain hoses are not kinked during installation.
Disconnect the 2 roof opening panel rear drain hoses from the frame.
7. CAUTION: To avoid damage to the roof opening panel frame, be sure to support the frame when removing the mounting bolts.
Remove the 10 roof opening panel frame mounting bolts.
-
To install, tighten to 9 Nm (80 lb-in).
8. Remove the roof opening panel frame.
9. To install, reverse the removal procedure.
-
Check for correct alignment of the roof opening panel.
10. Initialize the roof opening panel motor.