F 150 2WD Pickup V8-4.6L VIN W (2006)
2. NOTE: Do not turn the camshaft while carrying out this procedure.
Position the camshaft bearing cap and install the bolts.
3. Use Plastigage to verify the camshaft journal clearance.
^
If out of specification, install new components as necessary.
Camshaft End Play - Push Rod Engines
Special Tool(s)
1. Remove the valve tappets.
2. Use a Dial Indicator Gauge with Holding Fixture to measure camshaft end play.
3. Position the camshaft to the rear of the cylinder block.
4. Zero the indicator.
5. Move the camshaft to the front of the cylinder block. Note and record the camshaft end play.
^
If the camshaft end play exceeds specifications, install a new camshaft thrust plate.
Camshaft End Play - OHC Engines
