F 150 2WD Pickup V8-4.6L VIN W (2006)
3. Install the valve cover and tighten the valve cover bolts in the sequence shown.
^
Tighten to 10 Nm (89 inch lbs.).
4. Install the suction accumulator and install the nuts.
^
Tighten to 6 Nm (53 inch lbs.).
5. Attach the 5 engine wiring harness retainers to the valve cover stud bolts.
6. Position the transmission fluid level indicator tube and install the bolt.
^
Tighten to 10 Nm (89 inch lbs.).
7. Position the PCV tube and connect the quick connect couplings.
8. Install the PCM and bracket.
