ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Temperature Blend Door Actuator|Page 7065 > < Temperature Blend Door Actuator
Page 1
background image

Air Door Actuator / Motor: Service and Repair
Mode Door Actuator

Air Inlet Door

MODE DOOR ACTUATOR - AIR INLET DOOR

Removal and Installation

1. Remove the instrument panel. Refer to:  Body and Frame, Interior Moulding/Trim, Dashboard/Instrument Panel, Service and Repair, Removal and

Installation, See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and Installation

2. Disconnect the air inlet mode door actuator electrical connector.
3. Remove the 3 air inlet mode door actuator screws.
4. Remove the air inlet door mode door actuator.
5. To install, reverse the removal procedure.

Defrost/Panel/Floor Door

MODE DOOR ACTUATOR - DEFROST/PANEL/FLOOR DOOR

Removal and Installation

Temperature Blend Door Actuator|Page 7065 > < Temperature Blend Door Actuator