F 150 2WD Pickup V8-4.6L VIN W (2006)
Condenser HVAC: Service and Repair
CONDENSER CORE
Removal and Installation
NOTE: Installation of a new suction accumulator is not required when repairing the air conditioning system, except when there is physical evidence of
contamination from a failed A/C compressor or damage to the suction accumulator.
1. Recover the refrigerant.
2. Disconnect the condenser fittings.
-
Discard the O-ring seals.
-
To install, tighten to 25 Nm (18 lb-ft).
3. Position the transmission oil cooler aside.
1
Remove the 2 transmission oil cooler bolts.
2
Position the transmission oil cooler aside.
-
To install, tighten to 12 Nm (9 lb-ft).
4. Position the hood latch bracket aside.
1
Remove the 3 hood latch bracket bolts.
2
Position the hood latch bracket aside.
-
To install, tighten to 12 Nm (9 lb-ft).
5. Remove the 2 condenser bracket bolts.