Front Seat Belt Retractor Replacement for F-150 V8-46L VIN W (2006)
3. Remove the D-ring nut.
-
To install, tighten to 40 Nm (30 lb-ft).
4. Remove the safety belt anchor bolt.
-
To install, tighten to 48 Nm (35 lb-ft).
5. Remove the C-pillar trim panel(s) and position aside.
6. Remove the safety belt retractor bolt and the safety belt retractor.
-
To install, tighten to 48 Nm (35 lb-ft).
7. To install, reverse the removal procedure.
8. Check the active restraint system for correct operation.