F 150 2WD Pickup V8-4.6L VIN W (2006)
Flywheel: Service and Repair
Dowels-Flywheel
Removal
1. NOTE: Take care not to damage the flywheel dowel holes or surface areas around the flywheel dowel during removal.
Remove the flywheel dowels by using a drift pin where the flywheel dowel is installed in an open hole and locking pliers where the flywheel dowel
is installed in a blind hole.
Installation
1. NOTE: Care should be taken to drive the flywheel dowel squarely into place until fully seated. Be careful not to damage surrounding surface
areas.
Install all flywheel dowels by driving them into place using a brass or plastic mallet.
