F 150 2WD Pickup V8-5.4L Prop SOHC VIN Z (1998)
(2) Tighten the pressure hose fitting.
3. Position the power steering pump and loosely install the power steering pump bolts.
4. Tighten the upper power steering pump bolts.
5. Tighten the lower power steering pump bolt.
6. Lower the vehicle.
NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.
7. Install the power steering pressure hose to the steering gear.
8. Connect the (A) power steering reservoir pump hose to the (B) power steering pump.
9. Install the drive belt.