ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Doors, Hood and Trunk|Hood > < SuperCab|Page 9601
Page 2
background image

3. Remove the parts in the order indicated in the illustration and table.

To remove individual components, only carry out the listed steps.

4. To install, reverse the removal procedure.

Item 2: Watershield Removal Note

1. Do not tear or damage the watershield during disassembly.

Item 3: Rear Door Window Glass-to-Regulator Bolts Removal Note

NOTE:  Some vehicles may use rivets to attach the glass to the regulator.

1. If removing only the rear door glass regulator assembly and motor, secure the rear door glass in the full up position with tape.

Item 4: Rear Door Window Glass Removal Note

1. Pull the glass out through the top inboard side of the door.

Item 8: Rear Door Window Glass Top Run Removal Note

1. Remove the glass top run through the top opening of rear door.

Item 2: Watershield Installation Note

1. Watershield must be installed so that edges have a weatherproof seal.

Doors, Hood and Trunk|Hood > < SuperCab|Page 9601