F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
Release the clip at the rear of side shield by detaching the clip from the metal bracket on the track. Partially flex the side shield at the rear to obtain
access to the recliner handle clip. Remove the recliner handle clip (shown removed for clarity) and the recliner handle.
Item 11: Side Shield Screws Disassembly Note
1. Remove the three screws and the side shield.
Item 19: Seat Cushion Pan Nuts Disassembly Note
1. If equipped, disconnect the power seat track motor electrical connector and release any pin-type retainers attached to the seat cushion pan.
2. If equipped, disconnect the three memory seat motor position sensors (one shown) electrical connectors and release any pin-type retainers attached
to the seat cushion pan.
