F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
Part 2
4. Disassemble the parts in the order listed in the illustration and table.
Item 1: Cushion Assembly Disassembly Note
1. CAUTION: It is necessary to rezero the OCS system when a front passenger seat cushion is disassembled, a new trim cover is installed,
or an OCS service kit is installed. A scan tool is used to trigger the active command to carry out rezeroing of the OCS system.
For disassembly of the passenger seat cushion assembly (cushion trim cover, foam pad and OCS, cushion pan), refer to the Occupant
Classification Sensor removal and installation procedure in Air Bag Systems.
Item 4: Recliner Handle Disassembly Note
1. NOTE: Recline the seat backrest before removing the recliner handle to ease seat cushion assembly removal.
Release the clip at the rear of side shield by detaching the clip from the metal bracket on the track. Partially flex the side shield at the rear to obtain
access to the recliner handle clip. Remove the recliner handle clip (shown removed for clarity) and the recliner handle.
Item 12: Side Shield Screws Disassembly Note