F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
4. Remove the inboard recliner adjuster bolt.
Item 20: Backrest Inboard Pivot Bolt Disassembly Note
1. NOTE: Do not damage the plastic pivot bushing when removing or installing the pivot bolt.
Remove the inboard pivot bolt.
Item 21: Backrest Outboard Pivot Bolt Disassembly Note
1. Remove the outboard pivot bolt and remove the backrest.
ASSEMBLY
1. NOTE: Make sure the battery negative cable is still disconnected before continuing with the assembly portion of this procedure.
To assemble, reverse the disassembly procedure.
2. Install the passenger seat.
3. CAUTION:
-
It is necessary to rezero the OCS system when a front passenger seat cushion is disassembled, a new trim cover installed, or an OCS
service kit is installed. A scan tool is used to trigger the active command to carry out rezeroing of the OCS system.
-
Make sure the seat is completely assembled before rezeroing.
-
The following precautions must be taken before rezeroing the OCS system:
-
Make sure the OCS system components are connected and no faults are present.
