F 150 2WD Pickup V8-5.4L SOHC VIN 5 (2004)
Power Door Lock Switch: Description and Operation
Deactivating/Activating Power Door Unlock Switch Inhibit
DEACTIVATING/ACTIVATING POWER DOOR UNLOCK SWITCH INHIBIT
NOTE: The power door unlock switch inhibit feature needs to be enabled to perform this procedure.
This feature can be configured by the customer. Steps 1, 2 and 3 must be completed within 30 seconds.
1. Turn the key to ON, then press UNLOCK 3 times.
2. Turn the key to OFF, then press UNLOCK 3 times.
3. Turn the key to ON.
4. Verify that the horn chirps. This indicates the enable/disable mode is ready to receive program changes.
5. Within 5 seconds press the LOCK button twice.
One horn chirp indicates the system is disabled. One horn chirp, followed by the horn sounding, indicates the system is enabled.
Pressing the lock button twice again toggles the door lock control switch UNLOCK button inhibit feature state.
Turn the key OFF to exit the enable/disable programming mode.